Dow Inc

Products

ACRYLIGARD Acrylic Resin Powder CS-134

    • Product Name: ACRYLIGARD Acrylic Resin Powder CS-134
    • Chemical Name (IUPAC): Poly(methyl methacrylate)
    • CAS No.: 25085-02-3
    • Chemical Formula: (C3H4O2)n
    • Form/Physical State: Powder
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 771523
    Product Name ACRYLIGARD Acrylic Resin Powder CS-134
    Appearance Fine white powder
    Chemical Type Acrylic resin
    Binder Content Approximately 99%
    Particle Size 10-30 microns
    Bulk Density 0.45-0.60 g/cm³
    Solubility Insoluble in water, dispersible in water
    Glass Transition Temperature About 105°C
    Ph Value 7-9 (10% suspension)
    Application Cementitious mortars and renders
    Storage Temperature 5-35°C
    Shelf Life 12 months (unopened, dry conditions)
    Odor Odorless
    Film Forming Temperature Minimum 10°C
    Flammability Non-flammable

    As an accredited ACRYLIGARD Acrylic Resin Powder CS-134 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing The **ACRYLIGARD Acrylic Resin Powder CS-134** is packaged in a sturdy 20 kg white bag with blue labeling and product information.
    Container Loading (20′ FCL) Container Loading (20′ FCL): **10 metric tons packed in 400 bags of 25 kg each, palletized and shrink-wrapped, for safe transport.**
    Shipping ACRYLIGARD Acrylic Resin Powder CS-134 is shipped in tightly sealed, moisture-resistant bags or drums, typically packed in sturdy cartons for protection during transit. Standard packaging sizes vary. Handle with care, avoiding exposure to heat, moisture, or direct sunlight. Shipping complies with applicable chemical safety and transportation regulations.
    Storage ACRYLIGARD Acrylic Resin Powder CS-134 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture. Keep the container tightly closed when not in use. Store away from oxidizing agents and incompatible materials. Ensure the storage area is secured and labeled, and follow all applicable safety regulations and guidelines for chemical storage.
    Shelf Life ACRYLIGARD Acrylic Resin Powder CS-134 has a shelf life of 12 months when stored in cool, dry, and sealed conditions.
    Application of ACRYLIGARD Acrylic Resin Powder CS-134

    Applications of ACRYLIGARD Acrylic Resin Powder CS-134 in Industrial Manufacturing

    ACRYLIGARD Acrylic Resin Powder CS-134 is engineered to support advanced performance requirements in multiple industrial sectors. Our technical team works closely with high-volume producers to ensure integration of CS-134 delivers reliable processability and consistent results across targeted downstream applications. Below, we provide practical use cases and technical reference points for manufacturers operating in select industries.

    1. Water-Based Industrial Coatings

    Major coatings producers use CS-134 as a critical film-forming binder in water-based acrylic topcoats and primers. The resin enables rapid curing at ambient temperatures, and supports stable dispersion with high solids content. Manufacturers favor CS-134 for production of abrasion-resistant architectural and industrial coatings that require compliance with VOC restrictions and prolonged exterior durability.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Construction Tile Adhesives and Repair Mortars

    Cementitious adhesive and repair mortar manufacturers blend CS-134 to increase flexibility, adhesion, and water retention in formulated powder systems. The acrylic resin enhances open time and mechanical bonding for tile adhesives and patch mortars subjected to dynamic loads or temperature cycles in civil engineering and building restoration.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Pressure-Sensitive Adhesives (PSA) for Industrial Tapes and Labels

    Formulators producing pressure-sensitive adhesives incorporate CS-134 to adjust tack, peel strength, and clarity for products serving the packaging, automotive, and electronics industries. The resin allows for precise viscosity modification in solvent-free and emulsified adhesive systems, contributing to resilient bonding performance under variable humidity and temperature conditions.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Thermoplastic Road Marking Paints

    Producers of road marking materials select CS-134 to reinforce binder matrices in thermoplastic highway paints. The acrylic resin enhances pigment dispersion, anti-cracking properties, and chemical resistance, supporting the creation of highly visible, UV-stable markings suitable for high-traffic pavement in diverse climates.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Leather Finishing and Surface Sealing Compounds

    Specialty leather chemical producers add CS-134 into waterborne finishing emulsions and sealing agents for natural and synthetic leather. The resin component forms flexible, abrasion-resistant surface films with controlled gloss, and resists color migration, fulfilling key property requirements for consumer and automotive upholstery leathers.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Plastisol and Waterborne Ink Binders for Screen Printing

    Screen printing ink producers utilize CS-134 to achieve strong pigment binding and consistent film formation in both plastisol and waterborne ink systems. The resin’s compatibility with a wide pigment spectrum and its thermal/chemical stability ensures production of non-cracking, flexible prints on textiles and industrial substrates, supporting high-speed processing and wash durability.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive ACRYLIGARD Acrylic Resin Powder CS-134 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    ACRYLIGARD Acrylic Resin Powder CS-134: A Manufacturer’s Perspective

    Introducing CS-134: Experience on the Production Floor

    As a producer responsible for ACRYLIGARD Acrylic Resin Powder CS-134, I see every batch leave our reactors and driers. With each order, quality doesn't just run through an inspection checklist—it shows in the steady, powdery flow when poured, the bright clarity in test dispersions, and the satisfaction from formulators who count on predictable results. CS-134 stands as an acrylic resin powder with a composition that reflects years of refinement and direct feedback from coatings and adhesives professionals. Our intent with CS-134 was never just to fill a commodity slot. Instead, we address specific demands raised during conversations with formulators and production engineers who work hands-on with raw materials every day.

    Specifications From Hands-on Experience

    We produce CS-134 as a fine acrylic copolymer resin, targeting consistent particle size and controlled glass transition temperature. Through direct production, we've reached a median particle diameter suitable for dry blending and dispersions, and maintained stable moisture content, giving real-world confidence for moisture-sensitive end-uses. Our resin runs towards clarity and low residual monomer content. Instead of pursuing abstract “performance improvements,” we’ve tuned runs of CS-134 based on clear feedback: users want powders that disperse easily without clumping or forming “fish eyes.” Our packaging uses industrial-grade, antistatic liners that resist caking—a small detail until a shift operator tells you how easy it is to empty a bag into a high-shear mixer.

    Practical Advantages in Applications

    Across the industry, formulators have long valued acrylic resin for durability, weather resistance, and gloss. CS-134 takes these properties and puts them in a form that works for a range of waterborne and solventborne systems, especially where practical formulating flexibility matters. Whether added into protective coatings, industrial primers, or flexible adhesives, the powder integrates smoothly and offers film-forming at lower temperatures than many generic bead resins.

    Our process stability ensures the end properties in coatings—toughness, resistance to yellowing, gloss retention—mark a real improvement over several conventional resin powders. We don’t chase spec sheet “maximums,” but strive for predictable middle-of-the-road performance that customers can build a system around. From my position at the plant, I see how formulators benefit most from resin powders that simply behave the same way batch after batch, regardless of the humidity in the shop or the scale of their production vessels.

    Comparing CS-134: A Manufacturer-Driven View

    Over years of manufacturing acrylic resin powders, I’ve seen a parade of offerings: some imported as off-white granules, some re-labeled in lost-in-the-shuffle translations, others pitched as “universal binders.” The difference with CS-134 has solid ground. We’ve built a recipe aimed for blending performance, straightforward cleaning, and achievable gloss, not marketing buzzwords.

    The “feel” of CS-134 during addition is distinct. It pours clean and quick, and I’ve seen how it keeps dust levels low in our mixing tanks. Purity stays controlled, so downstream customers don’t have to wrangle unexpected odors or yellowing during cure. And unlike several competitive resins relying on fillers or process shortcuts, CS-134 remains purely acrylic—no hidden plasticizers or recycled fractions that might compromise strength over time. Feedback usually circles back to consistency: every pail or bag delivers the properties expect—for example, rapid hydrogen bonding on dispersion and reliable crosslinking on cure—keep real-world product runs on schedule.

    Why Formulators Choose CS-134

    Formulators facing production bottlenecks often look for more than a “standard” acrylic resin. Their needs reflect problems encountered daily: slow dispersion, residues in lines, unpredictable viscosity swings, or complaints about final gloss. Having stood at the reactor drain, I can say that predictable behavior comes from steady upstream controls. We've locked in feed monomer ratios and process stability to take the guesswork out of end-use performance.

    CS-134 brings flexibility without overcomplicating the formulation process. Technicians blending coatings get powder that wet outs and disperses without troublesome clumps. There’s no surprise separation after storage; no unwanted foaming during high-speed mixing. The powder form lends itself to systems looking to maximize shelf-life and minimize transport costs. Maintenance is simpler, because lines clean up easily after running CS-134. There are no mysterious films left behind, no offbeat odors to chase down.

    Technical Insights: What Sets CS-134 Apart

    Each grade of acrylic resin comes with tradeoffs—a basic truth. In our hands, CS-134 reflects a process that pairs good particle control with the right polymer backbone. Achieving even particle size distribution means fewer headaches during large-scale blending. We’ve found a particular sweet spot of glass transition temperature; too high and users struggle with film-forming, too low and the resin loses vital hardness. Here, CS-134 delivers a dry but easily-redispersed powder, with a balance tailored to durable, flexible films.

    Technical staff in our labs stress-test each batch under conditions reflective of real production environments: variable water hardness, mechanical mixing in open drums, fluctuating ambient humidity. We watch for agglomeration, viscosity drift, and cure-thru properties, iterating procedure if the data suggest any trend out of bounds. Our QC isn’t stuck at the end—feedback from bulk warehouse users cycles right back to our reactors, so we tweak polymerization curves and drying cycles as needed. This loop keeps product performance reliable across seasons, markets, and shifts.

    Meeting Evolving Industry Challenges

    Industry moves quickly, but some challenges echo yearly: pressure for lower VOCs, wider regulatory scrutiny, and persistent cut-throat cost pressures. Rather than bolt on adjustments, our line adapts by listening to the day-to-day roadblocks formulators face. CS-134 fits growing demand for low-VOC and waterborne systems, thanks to its easy dispersion and film-formation at lower temperatures. Producers shifting from solventborne systems find that CS-134 integrates without forcing deep reformulation. Shelf-life keeps for months in standard warehouse environments, reducing the constant worry of spoilage common to liquid latexes or pastes.

    For lines under regulatory scrutiny for hazardous monomers or heavy metals, CS-134 comes free from problematic ingredients. Our record of supply to multinational and independent coatings firms pushes us to keep the resin profile straightforward—no lead, phthalates, or problematic co-monomers even in trace.

    Feedback From Across the Production Chain

    One of the most valuable perspectives comes directly from plant workers and formulation chemists. We hear of spills that used to gum up floor drains—complaints dropped since switching to CS-134. Warehouse teams mention the ease of handling, with less dusting in hot weather, meaning not only cleaner air but also less material loss in inventory.

    Production lines appreciate reduced washdown times. Unlike some competitive resin powders that cling stubbornly or rehydrate unpredictably, CS-134 rinses out with a quick water spray. This gets equipment back into service faster, which in tight-run factories matters much more than technical perfection in a controlled lab setting.

    Lab staff remark on the repeatability of dispersion and minimal influence on batch-to-batch rheology. They dislike tasks that spiral into “troubleshooting black holes.” CS-134 reduces these headaches by providing a resin that, from order to order, stays on target. The knocks about finicky powders—or unusable end-product because of variable raw material quality—have dropped, replaced by steady reports of straightforward blending and reliable gloss after cure.

    Addressing Common Production Pain Points

    Every manufacturer has faced the effects of supply chain hiccups: inconsistent quality, delayed shipments, resin powder prone to caking on long voyages. For us, the challenge involves tuning both the production process and the shipment cycle. With CS-134, real production feedback prompted key changes in packaging. Our anti-caking liners and airtight seals aren't conveniences—they’re responses to actual plant conditions where humidity can wreck a month’s supply in a poorly-sealed bag. This experience means less unscheduled rework and lower raw material wastage down the line.

    More subtle yet crucial: flow consistency. A resin that clumps or waves out fines can cause automated feeders to misdose, stopping an entire production run. Our commitment to tight sieve fraction control in CS-134 comes exactly from these incidents. It wasn't a theoretical concern—it arose from conversations with independent production teams after experiencing blockages or erratic feeding. Investing in screening and air classification on our manufacturing line was driven directly by these issues.

    Supporting Innovation Without Sacrificing Basics

    Innovation gets headlines, but in practice, large-scale manufacturing runs on stability. New applications, from architecturally durable coatings to flexible adhesives and environmental barriers, demand reliability at a basic polymer level. R&D teams regularly challenge us to provide starting points that enable new edges in performance, without sending them chasing ghosts in their quality systems.

    With CS-134, our manufacturing philosophy keeps new ideas grounded on time-tested polymer chemistry. The acrylic backbone lends itself to modification, allowing researchers to trial new additive packages, UV stabilizers, or crosslinkers while counting on the resin’s core performance to remain steady. This encourages progress while protecting projects—no lost time due to “background noise” from unpredictable resin batches.

    Understanding Value Beyond Price

    Material purchasing doesn’t only revolve around price points—at least, not for customers whose production stops if one shipment is off grade. Having been on both sides of the order screen, I know the frustrations of late deliveries, uncommunicated formulation changes, and apologetic calls about off-color batches. With CS-134, longevity in the raw materials roster means not chasing the cheapest resin of the month. Our repeat customers commonly cite the value of avoiding line stoppages, failed batches, or infuriating troubleshooting cycles. The consistent process control at our end relieves these problems before they can disrupt daily production.

    Cost savings often appear in areas not visible on a purchasing spreadsheet: fewer maintenance calls, lower rework rates, smoother line startups, and stable QC signoffs. These benefits grow over months and years as customers build their own products around a resin they trust. We understand these priorities because our own plant lives with the consequences of inconsistency—and so does every client relying on our powder.

    Why We Avoid Unnecessary Complexity

    In the acrylic resin market, buzzwords move fast—“nano-structured,” “self-healing,” and “green chemistry” appear on trend sheets with clockwork rhythm. From a manufacturer’s bench-level perspective, the enduring problems are basic: achieving strong bonding, reliable dispersion, and predictable film-building. CS-134 meets those needs without overloaded formulations or obscure chemistry.

    Every synthesis step, from monomer feed to reactor quenching, gets measured against whether it adds value in the real production environments that our customers inhabit. Unnecessary complexity gets weeded out, because plant engineers or batch operators don't want specialty blends with uncertain side reactions. They prefer the predictable performance of standard-grade acrylic, knowing that their specific tweaks—plasticizers, pigments, additives—should land on a reliable resin base.

    Anticipating Future Industry Needs

    Demand for resins continues to shift as end users push for lower emissions, longer service life, and ease of use. Paint shops want dust-free addition and rapid mixing. Adhesive lines look for lower residue and easy tank cleaning. Regulatory specialists want safety data that matches the actual product, with no creeping introduction of new hazards. Product managers seek stability, so they aren’t forced to reformulate every quarter in response to cost-driven raw material changes.

    Over the next years, these forces will only intensify. Our job as manufacturers centers on responding to these needs not only in product design but in transparent operations. We maintain tight change controls, offer clear communication on batch shifts, and focus on materials that avoid regulatory surprises. Feedback from specialty and commodity users shapes each iteration of CS-134 in how it blends, stores, and performs through varied climates and equipment. This engagement, more than any grand vision for the future, shapes our strategy. Our production floor doesn’t traffic in trends—it responds to the concrete problems facing formulators in ever-shifting conditions.

    Conclusion: The Manufacturer’s Pledge

    CS-134 stands not as a showpiece but as the result of years of listening, adjusting, and re-tuning what acrylic resin powders should deliver. We trust our process because it was built side-by-side with the chemists and technicians who make up this industry. Our commitment, visible in every batch and every on-time shipment, is to keep quality practical, consistent, and focused on the realities of modern production. Each user shapes a part of this ongoing process, keeping our focus on what matters: smooth blends, reliable films, and absolute trust that the next batch of acrylic resin powder will be just as good as the last.